Diskpart command list
The list of sub-commands for Diskpart are shown below. Some commands are not available in Windows XP and they are indicates with an asterisk (*).
ACTIVE – Mark the selected partition as active.
ADD – Add a mirror to a simple volume.
ASSIGN – Assign a drive letter or mount point to the selected volume.
ATTRIBUTES – Manipulate volume or disk attributes.*
ATTACH – Attaches a virtual disk file.*
AUTOMOUNT – Enable and disable automatic mounting of basic volumes.*
BREAK – Break a mirror set.
CLEAN – Clear the configuration information, or all information, off the
disk.
COMPACT – Attempts to reduce the physical size of the file.*
CONVERT – Convert between different disk formats.
CREATE – Create a volume, partition or virtual disk. (No virtual disk management in Windows XP.)
DELETE – Delete an object.
DETAIL – Provide details about an object.
DETACH – Detaches a virtual disk file.*
EXIT – Exit DiskPart.
EXTEND – Extend a volume.
EXPAND – Expands the maximum size available on a virtual disk.*
FILESYSTEMS – Display current and supported file systems on the volume.*
FORMAT – Format the volume or partition.*
GPT – Assign attributes to the selected GPT partition.*
HELP – Display a list of commands.
IMPORT – Import a disk group.
INACTIVE – Mark the selected partition as inactive.
LIST – Display a list of objects.
MERGE – Merges a child disk with its parents.*
ONLINE – Online an object that is currently marked as offline.
OFFLINE – Offline an object that is currently marked as online.
RECOVER – Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.*
REM – Does nothing. This is used to comment scripts.
REMOVE – Remove a drive letter or mount point assignment.
REPAIR – Repair a RAID-5 volume with a failed member.
RESCAN – Rescan the computer looking for disks and volumes.
RETAIN – Place a retained partition under a simple volume.
SAN – Display or set the SAN policy for the currently booted OS.*
SELECT – Shift the focus to an object.
SETID – Change the partition type.*
SHRINK – Reduce the size of the selected volume.*
UNIQUEID – Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.*
*indicates a command missing from Windows XP.
Make a USB key bootable
This example applies to Windows Vista and Windows 7. Windows XP does not support using Diskpart on flash drives. Open a command prompt with administrator rights and enter the following sequence of commands:
- diskpart
- list disk
- select disk {number}
- clean
- create partition primary
- select partition 1
- active
- format fs=fat32 quick
- assign
- exit
In the „select disk“ command, replace {number} with the drive number of your USB drive. Take care to choose the correct number since this procedure erases everything on the drive you select.
The format command given above will create a FAT32 file system. This creates a bootable USB key that can be used for many purposes, once appropriate files are added. For example, it can be used to install Windows 7 (if the flash drive is large enough). . If you wish to use the USB key to actually run Windows 7 or otherwise need NTFS formatting, you will need to replace „format fs=fat32“ with „format fs=ntfs“ and also modify the boot sector.