[admin@Example-Router] > /ip arp print
Flags: X - disabled, I - invalid, H - DHCP, D - dynamic
# ADDRESS MAC-ADDRESS INTERFACE
0 D 1.1.1.2 00:0B:BF:93:68:1B outside
[admin@Example-Router] >
[admin@Example-Router] > /ip arp print detail
Flags: X - disabled, I - invalid, H - DHCP, D - dynamic
0 D address=1.1.1.2 mac-address=00:0B:BF:93:68:1B interface=outside
[admin@Example-Router] >
[admin@Example-Router] /ip address> print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 10.1.0.1/24 10.1.0.0 10.1.0.255 inside
[admin@Example-Router] /ip address> add address=1.1.1.2/29 interface=outside
[admin@Example-Router] /ip address> print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 10.1.0.1/24 10.1.0.0 10.1.0.255 inside
1 1.1.1.2/29 1.1.1.0 1.1.1.7 outside
[admin@Example-Router] /ip address>
[admin@Example-Router] > /ip route add dst-address=0.0.0.0/0 gateway=1.1.1.1
[admin@Example-Router] > /ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 1.1.1.1 1
1 ADC 10.1.0.0/24 10.1.0.1 inside 0
2 ADC 1.1.1.0/29 1.1.1.2 outside 0
[admin@Example-Router] >
/ip firewall filter
add chain=input connection-state=established action=accept
add chain=input connection-state=related action=accept
add chain=input connection-state=invalid action=drop
add chain=input in-interface=inside action=accept
add chain=input action=drop
/ip firewall nat
add chain=srcnat out-interface=outside action=masquerade
/system ntp client
set enabled=yes primary-ntp=2.2.2.2 secondary-ntp=3.3.3.3
Převzato z www.mikrotik.com
Příspěvek byl publikován v rubrice
Administrace,
WiFi. Můžete si uložit jeho
odkaz mezi své oblíbené záložky.
